Digital police camera systems depend on a good-sized data store. Without it, police cars would have to download video manually at the end of every shift. Additionally, in-vehicle car video systems are not reliable as they are too fragile for the constant wear and tear of police usage. Police vehicles face constant shock, vibration, and exposure to nature’s elements, like wide temperatures and humidity.
We will be reviewing a police in-car surveillance camera system to resolve these challenges— the solution centers around V3S, the rugged in-vehicle NVR. The device comes with four PoE ports to connect cameras. For connectivity, it can be expanded to support WiFi to allow wireless VAN, and 4G/LTE for Internet gateway capabilities.
Traditional police car gear is not dedicated. Police vehicles are in constant movement. They are likely to face shock, vibration, and continuous exposure to the changing temperatures. It is not uncommon to see typical car computers going through normal wear and tear and breaking down constantly. Aside from the traditional Mobile Data Terminal and radio units, police vehicles lack robust built-in connectivity.
In-vehicle video storage. If the police want to make the most out of a surveillance system, video needs to be High Definition (HD). But HD video is usually large in size, so the in-car storage needs to be able to accommodate large growing data for longer periods of time. Downloading video data every time a police officer’s shift is over is very unproductive.
A comprehensive police in-car video solution solves most of the challenges faced by traditional and modern digital systems. The following networked elements make up the solution:
- Cameras and Video-Mount Display (VMD)
Although most police cars only rely on the popular dash camera, a robust video solution should be capable of providing a wider surveillance area: at least four IP-enabled cameras should be used to expand visibility; One, the typical front-facing dash camera; Second, the camera facing the back seat, where a criminal would seat, and Third to Fourth, the cameras pointing on both sides of the car.
Additionally, police officers should have the in-car Video Mount Display (VMD) showing the multiple video input channels simultaneously.The IP camera systems and VMD are integrated with the in-vehicle NVR (Network Video Recorder).
- The Rugged in-vehicle NVR.
The typical in-vehicle Mobile Data Terminal (MDT) and the radio unit do not always stand up for the task. A robust police surveillance system needs a dedicated in-vehicle mounted computer with the right computing and network capabilities. This computer should take the role of the Internet gateway to allow access to remote resources on the move and also to input/output all video data from the IP cameras.
- The Remote Monitoring Center.
An officer in a police car can use video through the VMD to monitor the criminal sitting on the backseat, handle dangerous situations, take pictures of license plates, etc. But by leveraging LTE long-range mobile communications, the video can also be sent to headquarters. An agent sitting in a remote office with access to police car cameras can help police handle difficult situations.
V3S - The Rugged in-vehicle NVR
Lanner’s V3S is a fanless rugged in-vehicle NVR (Network Video Recorder) system targeted for surveillance, recording, and video analytics. The V3S NVR feeds from the DC 9~36V level power ignition module and takes up to four PoE/PoE+ (Power of Ethernet) cameras. It distributes electrical power and takes its video data.
The cameras feed video into the police car camera NVR system, to be viewed remotely from headquarters, locally in real-time, or recorded in its SATA storage.
Edge Computing Processing
The next-generation 14 nm Intel Atom® x7-E3950 SoC consumes low power and offers the right computing performance for vehicles.
V3S comes with abundant I/O peripheral connectivity. It includes two serial COM ports, two video outputs with DVI-D, USB ports, and digital I/O ports. For network, V3S has six RJ45 ports (four with PoE). The appliance comes with a removable SATA storage bay and support for the CAN bus.
V3S comes with two Mini PCIe sockets that can be expanded to support 3G/4G/LTE cellular communications. With the full-size Mini PCIe, the V3S can also be expanded with WiFi to allow wireless VAN (Vehicle Area Network).
Wide tolerance to harsh mobility and environment.
- In-Vehicle NVRs Enable 4G/LTE Real-Time Monitoring for Cash-In-Transit Operations
- In-Vehicle Surveillance with Multi-Purpose In-Vehicle PCs
Fanless In-vehicle Surveillance Computer with Intel® Atom™ x7-E3950 Processor
|CPU||Intel® Atom™ x7-E3950|